HP Manager Software Understanding Command Descriptions, WX1200# display ip ?, Set ap dap name

32CHAPTER 1: USING THE COMMAND-LINE INTERFACE

To see all the variations, type one of the commands followed by a question mark (?). For example:

WX1200# display ip ?	display ip aliases
alias
dns	display DNS status
https	display ip https
route	display ip route table
telnet	display ip telnet

To determine the port on which Telnet is running, type the following command:

WX1200# display ip telnet
Server Status	Port
----------------------------------
Enabled	23

Understanding

Command

Descriptions

Each command description in the 3Com Mobility System Software Command Reference contains the following elements:

„A command name, which shows the keywords but not the variables. For example, the following command name appears at the top of a command description and in the index:

set {ap dap} name

The set {ap dap} name command has the following complete syntax:

set {ap port-list dap dap-num}name name

„A brief description of the command’s functions.

„The full command syntax.

„Any command defaults.

„The command access, which is either enabled or all. All indicates that anyone can access this command. Enabled indicates that you must enter the enable password before entering the command.

„The command history, which identifies the MSS version in which the command was introduced and the version numbers of any subsequent updates.

„Special tips for command usage. These are omitted if the command requires no special usage.

„One or more examples of the command in context, with the appropriate system prompt and response.

„One or more related commands.