HP Manager Software manual Set igmp, Proxy-report, „ set igmp lmqi on, „ set igmp qri on

416CHAPTER 11: IGMP SNOOPING COMMANDS

	See Also
	„ set igmp lmqi on page 412
	„ set igmp qi on page 417
	„ set igmp qri on page 418
	„ set igmp querier on page 419
	„ set igmp mrouter on page 413
	„ set igmp rv on page 420
set igmp	Disables or reenables proxy reporting by a WX on one VLAN or all VLANs.
proxy-report	Syntax — set igmp proxy-report {enable disable}
	„ vlan vlan-id— VLAN name or number. If you do not specify a
	VLAN, proxy reporting is disabled or reenabled on all VLANs.
	„ enable — Enables proxy reporting.
	„ disable — Disables proxy reporting.
	Defaults — Proxy reporting is enabled on all VLANs by default.
	Access — Enabled.
	History — Introduced in MSS Version 3.0.
	Usage — Proxy reporting reduces multicast overhead by sending only
	one membership report for a group to the multicast routers and
	discarding other membership reports for the same group. If you disable
	proxy reporting, the WX sends all membership reports to the routers,
	including multiple reports for the same group.
	Examples — The following example disables proxy reporting on VLAN
	orange:
	WX1200# set igmp proxy-report disable vlan orange
	success: change accepted.

See Also

„set igmp rv on page 420