HP Manager Software manual Set timedate, Sets the time of day and date on the wireless LAN switch

180CHAPTER 6: IP SERVICES COMMANDS

set timedate Sets the time of day and date on the wireless LAN switch.

Syntax — set timedate {date mmm dd yyyy [time hh:mm:ss]}

„date mmm dd yyyy — System date:

„mmm — month

„dd — day

„yyyy — year

„time hh:mm:ss — System time, in hours, minutes, and seconds.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — The day of week is automatically calculated from the day you set. The time displayed by the CLI after you type the command might be slightly later than the time you enter due to the interval between when you press Enter and when the CLI reads and displays the new time and date.

Configure summertime before you set the time and date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is within the summertime period.

Examples — The following command sets the date to March 13, 2003 and time to 11:11:12:

WX4400# set timedate date feb		29 2004 time	23:58:00	PST
Time now is:	Sun	Feb 29 2004,	23:58:02

See Also

„clear snmp usm on page 122

„clear timezone on page 124

„display summertime on page 138

„display timedate on page 138

„display timezone on page 139

„set summertime on page 177

„set timezone on page 181