HP Manager Software manual Portvlanpri, „ clear spantree portcost on

374CHAPTER 10: STP COMMANDS

„vlan vlan-id— VLAN name or number. MSS resets the cost for only the specified VLAN.

	Defaults — None.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Usage — MSS does not change a port’s cost for VLANs other than the
	one(s) you specify.
	Examples — The following command resets the STP cost for port 2 in
	VLAN sunflower:
	WX4400# clear spantree portvlancost 2 vlan sunflower
	success: change accepted.
	See Also
	„ clear spantree portcost on page 372
	„ display spantree on page 376
	„ display spantree portvlancost on page 381
	„ set spantree portcost on page 392
	„ set spantree portvlancost on page 395
clear spantree	Resets to the default value the priority of a network port or ports for
portvlanpri	selection as part of the path to the STP root bridge, on one VLAN or all
	VLANs.
	Syntax — clear spantree portvlanpri port-list{all vlan
	vlan-id}
	„ port-list— List of ports. The port priority is reset to 32 (the default)
	on the specified ports.
	„ all — Resets the priority for all VLANs.
	„ vlan vlan-id— VLAN name or number. MSS resets the priority for
	only the specified VLAN.
	Defaults — None.
	Access — Enabled.