HP Manager Software manual Defaults None

324CHAPTER 9: MANAGED ACCESS POINT COMMANDS

See Also

„clear {ap dap} radio on page 272

„display {ap dap} config on page 277

„set {ap dap} radio radio-profileon page 324

„set radio-profile mode on page 342

set {ap dap} radio Assigns a radio profile to a MAP radio and enables or disables the radio. radio-profile

Syntax — set {ap port-listdap {dap-num auto}} radio {1 2} radio-profile name mode {enable disable}

„ap port-list— List of ports.

„dap dap-num— Number of a Distributed MAP.

„dap auto — Sets the radio profile for radios configured by the MAP configuration template. (See set dap auto on page 306.)

„radio 1 — Radio 1 of the MAP.

„radio 2 — Radio 2 of the MAP. (This option does not apply to single-radio models.)

„radio-profilename — Radio profile name of up to 16 alphanumeric characters, with no spaces.

„mode enable — Enables radios on the specified ports with the parameter settings in the specified radio profile.

„mode disable — Disables radios on the specified ports.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0. Option auto added for configuration of the MAP configuration template in MSS Version 4.0 .

Usage — When you create a new profile, the radio parameters in the profile are set to their factory default values.

To enable or disable all radios that use a specific radio profile, use set radio-profile.