HP Manager Software manual Syntax set radio-profile name max-tx-lifetime time

set radio-profile max-tx-lifetime 341

Usage — You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command changes the maximum receive threshold for radio profile rp1 to 4000 ms:

WX4400# set radio-profile rp1 max-rx-lifetime 4000 success: change accepted.

See Also

„set radio-profile mode on page 342

„set radio-profilemax-tx-lifetimeon page 341

„display radio-profileon page 298

set radio-profileChanges the maximum transmit threshold for the MAP radios in a radio

max-tx-lifetimeprofile. The maximum transmit threshold specifies the number of milliseconds that a frame scheduled to be transmitted by a radio can remain in buffer memory.

Syntax — set radio-profile name max-tx-lifetime time

„name — Radio profile name.

„time — Number of milliseconds. You can enter a value from 500 (0.5 second) through 250,000 (250 seconds).

Defaults — The default maximum transmit threshold for MAP radios is 2000 ms (2 seconds).

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples — The following command changes the maximum transmit threshold for radio profile rp1 to 4000 ms:

WX4400# set radio-profile rp1 max-tx-lifetime 4000 success: change accepted.