HP Manager Software manual Reauth-max, Reauth-period, „ set dot1x reauth-maxon

	clear dot1x reauth-max 481
clear dot1x	Resets the maximum number of reauthorization attempts to the default
reauth-max	setting.
	Syntax — clear dot1x reauth-max
	Defaults — The default is 2 attempts.
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — Type the following command to reset the maximum
	number of reauthorization attempts to the default:
	WX4400# clear dot1x reauth-max
	success: change accepted.
	See Also
	„ display dot1x on page 483
	„ set dot1x reauth-maxon page 492
clear dot1x	Resets the time period that must elapse before a reauthentication
reauth-period	attempt, to the default time period.
	Syntax — clear dot1x reauth-period
	Defaults — The default is 3600 seconds (1 hour).
	Access — Enabled.
	History —Introduced in MSS Version 3.0.
	Examples — Type the following command to reset the default
	reauthentication time period:
	WX4400# clear dot1x reauth-period
	success: change accepted.

See Also

„display dot1x on page 483

„set dot1x reauth-periodon page 493