Printronix Comprehensive Guide to T5000 Setup and Configuration

Chapter 2 QUICK SETUP Menu

QUICK SETUP Menu

QUICK SETUP

Print Intensity

Print Speed

Print Mode

-3*

6ips*

Transfer*

-15 to 15

2-10 ips1

Direct

Media Handling Tear-Off Strip* Tear-Off

Peel-Off

Cut

Continuous

Paper Feed Shift

Label Length

Label Width

Ver Image Shift

Hor Image Shift

Orientation

0.00 inches* 2		-0.50 to X inches3
4 or 6 inches* 2, 4		00.1 to 99.0 inches5
4.1, 6.6, or 8.5 inches* 2, 4			00.1 to 8.5 inches4
0.00 inches* 2		-1.00 to X inches3
0.00 inches* 2		-1.00 to 1.00 inches
Portrait*	Landscape			Inv. Portrait	Inv. Landscape

Gap/Mark Sensor

Auto Calibrate

Validator Funct.6

Save Config.

Disable*	Mark
Run Calibrate
Enable*	Disable
1*	1-8

Gap	Advanced Gap	Advanced Notch
Notes:
* = Default

1Maximum value depends on the width of the printer model and printhead.

2You can change the unit value from inches to millimeters under Units (in MEDIA CONTROL) See the T5000e User’s Manual for information.

Power-Up Config.

Factory*

1-8

3Based on the current value setting for the Label Length menu, up to a maximum of 12.80 inches.

4Maximum value depends on the width of the printer model.

5Maximum value depends on model width and size of DRAM installed.

6Appears only if the validator option is installed.

40