QUICK SETUP Submenus
41
QUICK SETUP Submenus

Print Intensity

Specifies the level of thermal energy from the printhead to be use d
for the type of media and ribbon installed.
Large numbers imply more heat (thermal energy) to be applied for
each dot. This has a significant effect on print quality. The print
intensity and speed must match the media and ribbon type to
obtain the best possible print quality and barcode grades.
The range is -15 through +15:
•In Transfer mode, the default is -3.
•In Direct Thermal mode, the default is 0.
QUICK SETUP
(cont. from previous page)
SMT: Status
Toolset [1]* Toolset [1] to Toolset [4]
SMT: Sel Toolset
Disabled* Enabled
EPC1
zEPC2, 3
SMT: SelectTool
Notes:
* = Default.
1Appears only if Toolset [1] is selected under
SMT: Sel Toolset.
2Appears only if Toolset [2] is selected under
SMT: Sel Toolset.
3Undocumented options are reserved for internal
use and future design.
UPCA1
zUPCA2,3 EAN81
zEAN82,3 EAN131
zEAN132,3 UCC1281
zUCC1282,3
GTIN1
zGTIN2,3