Chapter 3 Error Messages
Error Messages
The RFID UHF encoder can detect a number of errors. When one of these errors occurs, the RFID UHF encoder alerts the printer to perform the currently selected error action (see “Error Handling” on page 53) and show the appropriate error message on the printer display. RFID UHF encoder error messages are explained in Table 1.
Table 1. Error Message List
Error Message | Explanation | Solution |
|
|
|
|
|
|
RFID MAX RETRY | Error Handling = Overstrike in | Press PAUSE to clear the |
Check System | the RFID CONTROL menu, | message. |
| and the Label Retry count has | See “Troubleshooting” on |
| been exhausted. | page 67. |
|
|
|
RFID Reader | RFID error: communication | Press PAUSE to clear the |
Comm Error | cannot be established with | message. |
| the RFID UHF encoder. | See “Troubleshooting” on |
| Reader will be set to Disable | page 67. |
| in the RFID CONTROL menu |
|
| and the previous port settings |
|
| restored. |
|
|
|
|
RFID TAG FAILED | Error Handling = Stop in the | Press PAUSE to clear the |
Check Media | RFID CONTROL menu, and | message. |
| the RFID UHF encoder could | See “Troubleshooting” on |
| not read the RFID tag. | page 67. |
|
|
|
66
