Chapter 2 QUICK SETUP Menu
44
Label WidthThe allowable range in inches is 00.1 to the maximum print width of
the printer. The allowable range in millimeters is 2.5 to th e
maximum width of the printer.
Ver Im age ShiftSpecifies the amount to shift an image up (-) or down (+) for precise
positioning on the label. The actual height of the image is not
affected by this parameter. The allowable range is -1.00 inc hes to
the current Label Length value setting, up to a maximum of 12.80
inches in 0.01 inch increments.
The default value is 0.00 inches.
Hor Image ShiftSpecifies the amount to shift an image left (-) or right (+) for precise
positioning on the label. The actual width of the image is not
affected by this parameter. The allowable range is -1.00 thr ough
+1.00inchesin0.01inchincrements,displayedas
xx
/100.
The default value is 0.00 inches.
OrientationSpecifies the image orientation to be used when printi ng the label.
•Portrait.The defaul t.P ortrait refers to vertical page orientation,
where the height of a page is greater than its width. The top
edge of the image is parallel to the leading edge of the med ia.
The following example is viewed from the front of the printer.
4”
FEED
6”
The top edge of
the image is
parallel to the
leading edge of
the media.
Leading Edge