Random Access Adjustment Mode
The file name will be displayed in the upper right corner. The following items can be adjusted :
Total quantity horizontal pixels Active quantity horizontal pixels Horizontal start in pixels
Horizontal period in µs (is automatically adapted during the instal- lation of a file with LOAD)
Total vertical lines (is automatically adapted during the installation of a file with LOAD)
Active vertical lines Vertical start in lines
Interlaced : toggle on/off (is automatically set to its correct position during the installation of a file with LOAD)
All settings can individually be changed. Push the control disc up or down to select an item. The color of the selected item will change and follow one of the three methods to change the value.
a. press ENTER to activate the digits and enter directly with the numeric keys on the RCU or local keypad the new value or
b. press ENTER to activate the digits. Push the control disc to the right or to the left to select the changing digit. Push the control disc up or down to scroll to desired digit. When finished press ENTER to confirm.
c. counting up or down by pushing the control disc to the right or to the left.
How to find the correct values for the displayed item?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automatically measured and filled in in the menu table. These values will be available when starting up the EDIT procedure of an active file.
(Caution : Do not adjust these settings on an active file, they are used to identify the input source file.)
If the value for "Horizontal Total Pixels" is wrong, sampling mistakes (small vertical bars in the projected image) will be seen in the image. Select "Total" and adjust the pixel quantity. Adjust for zero bars (hint: if the number of bars increase, adjust in the other direction).
The "Active Pixels" : determine the width of the window on the screen. This value is normally given in the source specifications. If not, adjust until full image is displayed (no missing pixels).
"Horizontal Start" : number of pixels between the beginning of the input signal and the start of the video information in the signal.
"Horizontal Period" : already filled in with the correct value when active file. (see caution above).
The "Vertical Total Lines" are already filled when an active file is selected to be edited.
The "Active Lines" : number of horizontal lines determining the height of the projected image. This value is normally given in the specification of the source. If not, adjust until full image height is displayed (no missing lines)
Vertical start : number of lines between the start of the input signal and start of the image on the screen.
Interlaced [On] or [Off] : this selection is automatically filled when active file has to be edited. If the image is wrong due to mismeasurement, use the ENTER key to toggle between [On] and [Off]. (for interlaced images, 1 frame contains 2 fields).
Read AMDS
AMDS = automatic mode detection & synchronisation
During the installation of a file with LOAD, the system automatically measured the horizontal period, the total vertical lines and the interlaced mode.
When selecting Read AMDS, the system remeasures the above indicated items.
5975967 BARCOGRAPHICS 9200 070398
|
| EDIT FILE | xga.s30 | ||
HORIZONTAL |
|
|
| ||
TOTAL |
|
| 1344 PIXELS | ||
ACTIVE |
|
| 1024 PIXELS | ||
S T A R T |
|
| 296 | PIXELS | |
PERIOD |
|
| 20.678 µS | ||
VERTICAL (FIELD) |
|
| |||
TOTAL |
|
| 806 | LINES | |
ACTIVE |
|
| 768 | LINES | |
S T A R T |
|
| 36 LINES | ||
INTERLACED |
| [OFF] | |||
READ AMDS |
|
|
| ||
OPTIONS |
|
|
| ||
, | , | , | <ENTER>, <EXIT> | ||
