Barco 9200 owner manual Control, Front Panel Terminology

	0￿I	￿￿￿￿￿￿￿￿￿￿￿9￿￿￿￿￿￿￿￿+]$	￿￿￿			￿￿
					Location and Functions of Control
3	LOCATION AND FUNCTIONS￿￿￿￿				OF CONTROL￿
Front Panel Terminology
			PROJECTOR MODE :
			GREEN - OPERATION		DIAGNOSTICS
		COMMUNICATION PORT	RED - STANDBY	IR-ACKNOWLEDGED CODE		IR-RECEIVER
	RS232 OUT	RS 232 IN (800-PERIPHERALS) REMOTE
				IR-RECEIVED

1	RS232 IN : to allow communication with external compu-
	ter, e.g. IBM PC or compatible, Macintosh ...

RS232 OUT : used to connect to next projector, RS232IN

2plug (communication link for PC or MAC to the next projector).

3	Communication port : allows communication with the
	800 peripherals.

4Remote : remote input for wired remote control.

Projector mode indication : indicates the status of the

5 projector.

Light off : power switch is not pressed.

Red light : power switch is pressed, projector in stand by mode.

Green light : projector in operational mode.

6IR-Acknowledged : IR signals are recognized.

7

8

9

10

11

12

IR-Received : IR signals are received but not recognized by the projector.

Diagnostics code : a) source number

b)error code : a two digits error code is displayed when something goes wrong inside the projector.

IR receiver : receiver for control signals transmitted from the RCU.

Power switch : '1' = on, '0' = off

Power input : autoranging from 90 to 240 Vac.

Identification plate : name, serial number, art. number.

Voltage identification plate : name, art. number.

Control Panel Terminology a. Local keypad

Gaining access

The keypad is located behind a door, screened with the name of the projector.

To open the door, push once on the indicated side of the door and turn it to the front side of the projector.

5975967 BARCOGRAPHICS 9200 030798 3-1