Random Access Adjustment Mode
Side Keystone
Highlight Side Keystone by pushing the control disc up or down and press ENTER to select.
The side keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
Push the control disc to the right or to the left to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the control disc to the left. The number indication below the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the control disc to the right. The number indication below the bar scale will be positive.
Blanking
Highlight Blanking by pushing the control disc up or down and press ENTER to select.
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
The following blanking corrections are possible :
•top blanking
•bottom blanking
•left blanking
•right blanking
When Reset is selected, the 4 blanking settings are set to zero. The saved settings are erased.
Left blanking
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with 
or 
then <ENTER> <EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with | or |
then <ENTER> | |
<EXIT> to | BLANKING |
TOP
BOTTOM
LEFT
RIGHT
RESET
Select with 
or 
then <ENTER> <EXIT> to return.
Top blanking
Right blanking
Bottom blanking
5975967 BARCOGRAPHICS 9200 070398 |
| |
|
