Barco 9200 owner manual Installation Set Up, Configuration, Front/Table

Installation Set Up

5HDU4￿&HLOLQJ	INSTALLATION SET)URQWUP￿&HLOLQJ
The projector can be installed to project images in four different
configurations5HDU￿7DEOH	: front/table, front/ceiling, rear/table and rear/ceiling.	)URWQ￿7DEOH

To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER. Highlight Installation by pushing the control disc forward or backward and press ENTER to select. The installation menu will be displayed.

ENTER displays the Installation menu.

EXIT or ADJUST returns to operational mode.

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

Select with or

then <ENTER>

<EXIT> to return.

Highlight Configuration by pushing the control disc forward or backward and press ENTER to select. The configuration menu will be displayed.

ENTER displays the Configuration menu.

EXIT returns to the path selection menu.

ADJUST returns to operational mode.

INSTALLATION

INPUT SLOTS

CONVERGENCE

CONFIGURATION

OSD COLOR INTERNAL PATTERNS

Select with or then <ENTER> <EXIT> to return.

The actual selected configuration will be highlighted.

Push the control disc forward or backward to select the corresponding configuration with regard to the projector environment. Press ENTER to confirm your selection.

ENTER to confirm the selection.

EXIT returns to the installation menu.

ADJUST returns to operational mode.

CONFIGURATION

FRONT/TABLE

FRONT/CEILING

REAR/TABLE

REAR/CEILING

Select with or then <ENTER> <EXIT> to return.

5975967 BARCOGRAPHICS 9200 221297 4-1