Barco 9200 owner manual Video/S-video input module, 269,2VIDEO,1387

						Connections
Video/S-video input module		S-VIDEO			9,'(2￿6￿9,'(2VIDEO￿,1387
	On			L	AUDIO		27900
					On
					R
To the Video input :							98
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :				Audio input not
Separate Y-luma/C-chroma signals for higher quality playback of		S-Video input		available		Video input
Super VHS-signals.		PROJECTOR MODE :
		GREEN - OPERATION	DIAGNOSTICS
	COMMUNICATIONPORT	RED- STANDBY	IR-ACKNOWLEDGED CODE		IR-RECEIVER
RS232 OUT RS 232IN (800-PERIPHERALS)		REMOTE

1 x 4 pins plug (mini DIN)

pin configuration :

IR-RECEIVED

R G B H

V

1

ground luminance

R

G

B

H/ C V

6￿9,'(29,'(29,'(2￿,1387

R

G

B

H / C

V

On

2791098

2

ground chrominance

3

luminance 1.0 Vpp ± 3 dB

4

chrominance 282 mVpp ± 3 dB

Input selection :	Luma/Chroma	C om posite
		V ideo

Key in the corresponding slot number on the RCU or the local keypad. Depending on the priority setting in the Input slots menu, Video or S-Video will be displayed. If the wrong source type is displayed, start up the adjustment mode by pressing ADJUST or ENTER.

			VCR S-VHS		T V tun er, e .g.			A udio am plifier
					TV D M 40 stere o
					V C R
Push the control disc key forward or backward to highlight System
settings and press ENTER to display the 'System Settings menu'.					ADJUSTMENT MODE
EXIT returns to operational mode.
					Select a path from below :
					RANDOM ACCESS
					INSTALLATION
					SERVICE
Use the control disc to select 'Input Slots' by pushing it forward or					Select with	or
backward and press ENTER. The internal system will scan the inputs
					then		INSTALLATION
and displays the result in the 'Input Slots menu'.					<EXIT> to
							INPUT SLOTS
							CONVERGENCE
							CONFIGURATION
							OSD COLOR
Push the control disc forward or backward to select the correspond-
ing (video or S-video) input slot number.								INPUT SLOTS
To change the priority between Video and S-Video, press ENTER key							Select
to toggle.	-￿￿	-￿￿	-￿￿					Slot Module type [Config]
								1. RGB-SS [CV]
								2. RGB-SOG
								3. Video [Video]
								4. Component Video
				Straps on module level.
				Floating or non-floating input.
				Video input :
				J11 : strap "yes" : non floating				strap "no" : floating
				S-Video input :
	Non-Floating			J12 : strap "yes" : non floating				strap "no" : floating
				J13 : strap "yes" : non floating				strap "no" : floating
		Floating )ORDWLQJ￿RU￿QRQ￿IORDWLQJ￿LQSXW
				Factory preset : strap on, input non floating.

5975967 BARCOGRAPHICS 9200 221297 5-3