Barco 9200 owner manual Set up of the baud rate for communication with a computer

					-
					6HSDUDWH￿￿6\QF￿V￿VHOHFWLRQ6\QF￿RQ￿JUHHQ	Connections
Straps on module level :				-￿	-￿)ORDWLQJ-￿￿RU￿-QRQ￿￿IORDWLQJ-￿￿LQSXW
Floating or non-floating input.
Red :	J3	: strap "yes" : non floating	strap "no" : floating
Green : J4		: strap "yes" : non floating	strap "no" : floating
Blue :	J5	: strap "yes" : non floating	strap "no" : floating
H/C :	J6	: strap "yes" : non floating	strap "no" : floating
V : J7 : strap "yes" : non floating			strap "no" : floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : separate sync or sync on green.
Factory preset : separate sync.

Non-Floating

Floating

Connecting a computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 input of the projector.

The projector has a RS232 port that allows it to communicate with a computer.

Applications : remote control and DATA communications.

a)remote control :

-easy adjustment of projector via IBM PC (or compatible) or MAC connection.

-allow storage of multiple projector configurations and

set ups.

-wide range of control possibilities.

-address range from 0 to 255.

b)DATA communications :

-sending DATA to the projector or copying the VISION from the projector to a hard memory device.

Set up of the baud rate for communication with a computer.

See 'Change Baudrate PC' in chapter 'Service mode'.

	PROJECTOR MODE :
	GREEN- OPERATION	DIAGNOSTICS
COMMUNICATIONPORT	RED - STANDBY	IR-ACKNOWLEDGED CODE	IR-RECEIVER

RS232 OUT RS 232IN (800-PERIPHERALS) EMOTE

IR-RECEIVED

R

G

B 56FRQQHFWLRQ￿￿￿VG

B

H / C

V

6￿9,'(29,'(29,'(2￿,1387

R

G

B

H / C

V

27910

On

98

5975967 BARCOGRAPHICS 9200 221297 5-7