Barco 9200 owner manual Connecting a RCVDS 05 to the projector, Connecting a VS05 to the projector

Connections

Connecting a RCVDS 05 to the projector.

-Up to 10 inputs (20 when video inputs) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.

-Serial communication with the projector.

-Remote control buttons on the RCVDS to control the projector (source selection and analog settings).

-The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the

rear.

For more information about the use of the RCVDS 05, consult the owner's manual, order number : R5975765.

Connecting a VS05 to the projector

The VS05 can switch up to 5 Composite Video sources, 3 Super Video sources and 1 RGB analog or component video source to the projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier.

Order number : R9827890

For more information about the use of the VS05, consult the VS05 owner's manual, BARCO order number : R5975245.

Connecting an IR Remote Receiver 800 to the projector.

This infrared red receiver unit makes it possible to control the projector from another room.

There is a communication line cable between the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver 800.

The IR Remote Receiver 800 displays the selected source on a 7- segment display.

Order number : R9827515.

5-8 5975967 BARCOGRAPHICS 9200 221297