Regency L676S-NG1 Maintenance, Disconnect 2 wires, DC Spark Box Electrode Wire, Valve Tray Out

MAINTENANCE

11) Disconnect the inlet gas line from the	14) Disconnect the spark electrode wire from	16) Completely pull out the valve tray.
valve.	the DC spark box.

12)Unplug the green (TH) and white (TP/TH) wires from the valve.

Disconnect 2 wires

13)Disconnect the 2 DC Spark generator wires from the DC spark box located in front of the valve.

DC Spark Box Electrode Wire

15)Remove the 16 screws that hold the valve tray to the firebox and slightly pull out the valve tray.

Valve Tray Out

17)Replace the valve tray and reverse steps to re-install.

18)Turn on the gas supply and check for gas leaks.

19)Re-install the inner panels.

20) Re-install the burner.

21)Re-install the pilot shield.

22)Re-install the glass door.

23)Re-install the faceplate.

24)Check the inlet and outlet pressures.

25)Check operation of flame control.

26)Check for proper flame appearance.

MAINTENANCE

Location of Screws.

Disconnect 2 generator wires

Regency® L676S Direct Vent Gas Fireplace 41