INSTALLATION
INSTALLATION
PANEL INSTALLATION
Important: One set of panels must be installed. Operation of this unit without panels is prohibited.
Before installation, panels must be handled and cleaned as per instructions noted below:
Stainless Steel Panels | Black Enamel Panels |
• Stainless panels must be inspected for scratches and dimples prior | • Black Enamel panels must be inspected for scratches and dimples |
to installation. All claims to be recorded at this time. | prior to installation. All claims to be recorded at this time. |
Claims for damage after installation will not receive consideration. | Claims for damage after installation will not receive consideration. |
•To protect the finish during installation and handling - cotton gloves MUST be worn at all times while handling the panels (even when removing protective coating).
• Stainless panels will discolor a little during normal operation. | • Black Enamel panels will discolor a little during normal operation. This | |
This is normal and should not be considered a defect. | is normal and should not be considered a defect. | |
|
|
|
All hand and finger marks MUST be cleaned off with a soft cloth and |
| All hand and finger marks MUST be cleaned off with a soft cloth. Use |
*a stainless steel cleaner. Most stainless steel cleaners leave a film/ | an ammonia based cleaner (ie. glass cleaner) to remove any fingerprints | |
* |
| |
residue on the surface of the panels. Use an ammonia based cleaner | before applying heat to the unit. | |
(ie. glass cleaner) to remove this film before applying heat to the unit. | Failure to do this will result in burn stain on panels which you | |
Failure to do this will result in burn stains on panels which you | will be unable to remove. Not protected by product warranty. | |
will be unable to remove. Not protected by product warranty. |
|
|
1)With firebox base in position, install back panel first by fitting the tabs on the back panel in to slots in firebox base.
Firebox base. | Back panel. |
Slots on fl oor of fi rebox base.
32 | Regency® L676S Direct Vent Gas Fireplace |
