MAINTENANCE

VALVE TRAY REPLACEMENT

1)Shut off the gas supply to the unit.

2)Remove the faceplate.

3)Remove the glass door.

a. Release the 2 door latches on the left and right side at the top of the firebox.

5)Remove bolt on the clip holding in right inner panel.

8)When side panels have been removed, tilt back panel towards front of firebox.

6) Lift out right panel.

Latch Location

Latch

MAINTENANCE

b.Swing the door out from the top and release the hinge on the left side of the door and lift out.

7) Repeat process for left side.

Door

Hinge with door removed.

c.Place the door on a soft surface to prevent scratching the surface.

4)Remove the pilot shield and burner assembly. (see page 28 for removal instructions).

9)Lift back panel up and out from slots to remove.

Slots for back panel

10)Remove bolts to lift out the firebox base.

40

Regency® L676S Direct Vent Gas Fireplace

Page 40
Image 40
Regency L676S-NG1 installation manual Valve Tray Replacement, Door Hinge with door removed, Slots for back panel