Regency L676S-NG1 Installation, Holes on bottom of panel, Left panel, Use this hole on panel clip

INSTALLATION

Holes on bottom of

panel.

2)Locate the 2 holes on the bottom of the left inner panel.

INSTALLATION

Left panel.	Grommet on fi rebox
	base fl oor.

3)Line up the holes on the left panel with the grommets on the floor of the firebox base.

4)Place panel clip over existing hole in firebox. Place one Phillips screw to secure.

Note: Only use hole closest to back panel to secure panel clip, the panel clips can be used on either the left or right side.

Use this hole on panel clip.

5) Repeat steps 2-4 to install right side.

Regency® L676S Direct Vent Gas Fireplace 33