Barco 9200 owner manual Configuration, Internal Patterns

Installation Mode

Blue on green convergence.

Use the control disc to highlight Blue on green and press ENTER to display the Blue on green test pattern.

Repeat the same procedure as for Red on green lines but read blue when red is indicated.

To check the result of the convergence adjustments, highlight Hatch and press ENTER. A hatch pattern will be displayed on the screen. ENTER : displays a hatch pattern.

EXIT : returns to the installation menu.

All lines must be displayed in white, if not so repeat the convergence adjustment procedure.

Configuration

Highlight "Configuration" by pushing the control disc up or down and press ENTER to select.

For more information, see Projector configuration in chapter 4 : 'Installation Set Up'.

Internal Patterns

The projector is equipped with different internal patterns which can be used for measurment purposes.

Highlight "Internal Patterns" by pushing the control disc up or down and press ENTER to display the Internal Pattern selection menu. The following test pattern are available :

-Color Bars

-Multiburst

-Checker Board

-Purity

-Page Char (one page with the same character)

-Alpha-numeric characters

Each pattern (except Purity) can be inverted by pressing ENTER. For Page Char, the next or previous character can be selected by pushing the control disc up or down.

To return to the normal pattern, press EXIT.

CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with	or
then <ENTER>
<EXIT> to return.

INSTALLATION

INPUT SLOTS

CONVERGENCE

CONFIGURATION

INTERNAL PATTERNS

Select with or then <ENTER> <EXIT> to return.

INSTALLATION

INPUT SLOTS

CONVERGENCE

CONFIGURATION

INTERNAL PATTERNS

Select with	or
then <ENTER>
<EXIT> to	INTERNAL PATTERNS

COLOR BARS

MULTIBURST

CHECKER BOARD

PURITY

PAGE CHAR

ALPHA-NUMERIC CHARS

Select with or then <ENTER> <EXIT> to return.

9-4 5975967 BARCOGRAPHICS 9200 221297