Barco 9200 owner manual Starting up the Installation Mode, Input Slots, Enter

Installation Mode

9 INSTALLATION MODE

Starting up the Installation Mode

Push the control disc up or down to highlight Installation and then press ENTER.

ENTER continues to the Installation mode selection menu. EXIT returns to operational mode.

The following item can be selected in the Installation mode :

Input slots : to set up the input priority.

Convergence : to align the red, green and blue image.

Configuration : to set up the projector position.

Internal Patterns

Input Slots

Highlight Input Slots by pushing the control disc up or down and press

ENTER.

The internal system will scan the input slots and displays the result in the Input Slots menu.

Source	indication
Video or S-Video	Video[Video]
	Video[S-Video]
RGB analog	RGB-SS[CV] : separate sync is composite video
	signal on H/C input
	RGB-SS[CS or HS&VS] : separate sync is
	composite sync or horizontal and vertical
	sync
	RGB-SOG : sync on green
Component video	Component Video - SS : component video
	with separate sync
	Component Video - SOY : component video
	with sync on Y
	Component Video - 3LSS : component video
	with 3 level separete sync.
	Component Video - 3LSOY : component
	video with 3 level sync on Y.
RGB analog with
tri-level sync	RGB3L-SS : RGB with separate Tri level sync
	RGB3L-SOG : RGB with Tri level sync on
	green

If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral. If no 800 peripheral indication is made on the menu, there are still two possi- bilities :

-no RCVDS or VS05 connected or

-RCVDS is switched off.

When a 800 peripheral is connected to the projector, the input slots are not accessible with the control disc to toggle their function.

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

INSTALLATION

INPUT SLOTS

CONVERGENCE

CONFIGURATION

INTERNAL PATTERNS

Select with or then <ENTER> <EXIT> to return.

INSTALLATION

INPUT SLOTS

CONVERGENCE

CONFIGURATION

INTERNAL PATTERNS

Select with	or
then <ENTER>
<EXIT>	INPUT SLOTS

Slot Module Type (config)

1. RGB-SS [CV]

2. RGB-SOG

3. Video [Video]

4. Component Video

5975957 BARCOGRAPHICS 9200 221297 9-1