Chapter 2 Loading Media And Ribbon
34
Loading Ribbon
1. Installthe empty supply cor e on the take-up spindle.
2. Slidethe ribbon roll onto the ribbo n supply spindle until it stops
against the spindle flange.
3. Openthe pivoting deck by rotating the deck lock lev erful ly
clockwise until the deck swings upward.
4. Threadthe end of the ribbon under the rear ribbon guide ro ller,
then between the platen and the printhead.
Ribbon
Roll
Ribbon Supply Spindle
Deck Lock Lever
Pivoting
Deck
EmptySupply
Core
Media
Printhead
Rear Ribbon GuideRoller