Chapter 3 RFID CONTROL Menu

Tag Write Cnt

This menu item displays the number of tags written since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Failed Tag Cnt

This menu item displays the number of failed tag write attempts since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Clear Tag Stat

This menu item clears the Tag Write Cnt and Failed Tag Cnt menu items when selected.

Admin User Menu Items

To see these menu items, set Admin User to Enable in the

PRINTER CONTROL menu. (Refer to the User’s Manual.)

IMPORTANT Admin User menu items should only be used for troubleshooting.

RFID Test

This menu item reads the tag in range of the internal RFID antenna and reports the tag data to the debug port and momentarily displays it on the operator panel. It is primarily intended for development verification by checking that the system is working.

Auto Retry

This menu item allows the user to specify the number of automatic (internal) retries that the RFID UHF encoder will attempt before declaring a tag error. The default is 3.

F/W-Version

This menu item displays the reader firmware version.

54

Page 54
Image 54
Printronix T5000 setup guide Admin User Menu Items