Positioning The Media Sensors
39
Run A Barcode Demo TestIMPORTANT
Printronix recommends using the supplied starter roll of 100
labels to setup and verify printer operation. This will avoid
expending the more expensive smart labels for this task.
Before you send an actual print job, run a barcode demo test:
1. Pressthe PAUSE key until “OFFLINE”dis plays.
2. Pressthe TEST PRINT key until “Printer T ests/Barcode Demo”
displays.
3. Press↵. The Barcode Demo test pa ttern will start and print two
barcodes.
4. Checkthe test pattern. If nece ssary, reposition the pressure
blocks to obtain a uniform print quality. In most cases, you w ill
need to adjust only the right pressure block.
5. Ifdesired, you can run add itional printer tests, such as Grey,
Grid, and Checkerboard. See step 1 above to start other tests.
NOTE: These tests default to run continuously. Press ↵to end the
test.