QUICK SETUP Submenus
49
SMT: Select Tool
This menu appears only if the RFID UHF encoder is installed. See
“Software Migration Tools (SMT)”on page 63.
•EPC,GTIN,UPCA,EAN8,EAN13,andUCC128.SMTs
displayed if Toolset [1] is selected under SMT: Sel Toolset.
•zEPC,zGTIN,zUPCA,zEAN8,zEAN13, and zUCC128.SMTs
displayed if Toolset [2] is selected under SMT: Sel Toolset.
NOTE: Undocumented options are reserved for internal use and
future design.
For More InformationThis chapter has provided general information for use of y our
printer. The next chapter provides information about the RFID UHF
encoder.
Please refer to your
User’s Manual
for more detailed information
including:
•Other Configuration Menus
•Interfaces
•Diagnostics and Troubleshooting
•Printer Options
•Specifications
•Glossary of Terms