Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and may appear to vibrate.
◆Check that the display resolution and frequency from your computer or video board is an available mode for your set. On your computer check: Control Panel, Display, Settings.
◆If the setting is not correct, use your computer utility programme to change the display settings.
Your set supports multiscan display functions within the following frequency domain:
Horizontal frequency - | 30 | ~ | 68 kHz |
Vertical frequency - | 56 | ~ | 85 Hz |
Maximum refresh rate - | 1280 x 720 @ 60Hz | ||
In PC mode, the image is not centred on ◆ Adjust the horizontal and vertical position. the screen.
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. This is not from bad quality and you can use it without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 2,764,800.
Power Saver
This set has a
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.
State | Normal Operation | ||
(EPA/NUTEK) | |||
|
| ||
|
|
| |
Horizontal Sync | Active | Inactive | |
|
|
| |
Vertical Sync | Active | Inactive | |
|
|
| |
Power Indicator | Green | Red, Blinking (1 sec interval) | |
|
|
| |
Power Consumption | 80 W (Normal) | Less than 5 W | |
|
|
|
➣This set automatically returns to normal operation when horizontal and vertical sync are restored.
This occurs when you move the computer’s mouse or press any key on the keyboard.
