
Plug & Play
When the set is initially powered on, you are automatically presented with a series of basic customer settings.
The following settings are available.
1If the set is in standby mode, press the POWER( ) button on the remote control.
Result: The message Plug & Play is displayed. It appears for a little while, and then the
"Check antenna input." menu is displayed with the OK selected.
2 Press the ENTER button.
Result: The country menu is displayed:
Asia/W.Europe - CIS/E.Europe - China -
Hongkong/UK - Austrailia - NZL/Indonesia -
South Africa - America
3 Select your Area by pressing the or
button. Press the ENTER
button.
Result: The Auto Store menu is displayed with the Start selected.
4 Press the ENTER button.
Result: The channel search will start and end automatically.
5Select the Hour, min or am/pm by pressing the or
button.
Set the Hour, min or am/pm by pressing the or
button. (Refer to “Setting the Clock” on page 36)
6Press the MENU button to confirm your setting.
Result: The message Enjoy your viewing is displayed, and then the channel which has been stored will be activated.