AT&T 3 manual Setting System Security Options, System Security Administration

Programming the Mail System

1.From the System Administration Menu, press [ 6 ] for Line Ownership.

2.Press [ 4 ] to assign Line Ownership.

3.Enter a Line No. + [ # ].

4.Enter the Line Owner’s Extension + [ # ].

5.Repeat Steps 3 and 4 until finished.

6.Press [ ★ ] [ # ] to quit.

Setting System Security Options

Security options include Minimum Password Length and Security Violation Notification. There are factory settings for both options. Check mail system Planning Form N to see if you need to change the setting for either option.

■If you do NOT, skip to “After Initial Programming” on page 3-34.

■If you do, continue with the procedures in this section. For these procedures, you select the System Security option from the System Administration Menu. The System Security Menu plays. Figure 3-10 shows the options available from the System Security Menu.

System

Administration

Menu

9

System

Security

Minimum

Password

Length

Security

Violation

Notification

System

Administration

Password

Figure 3-10. System Security Administration

3-32Mail System Initial Programming