AT&T 3 manual Voice Mailbox Transfer, Voice Mail Messages

Telephone Button Programming

5 . At this point, do one of the following:

■Go to Step 3 of the next procedure to program another button for this extension.

■Press [ Central Tel Program ] and go to Step 2 of any button programming procedure in this section to program a button for a different extension.

■Press [ Feature ] [ 0 ] [ 0 ] to exit.

Voice Mailbox Transfer

This button enables any system user to transfer calls to a subscriber’s mailbox, without ringing the extension first.

To program a Voice Mailbox Transfer (VMBox) button as specified on communications system Planning Form C:

1.

2.

3.

4.

5.

Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].

Enter the number of the extension to be programmed.

Press a programmable button.

Press [ Feature ] [ 1 ] [ 4 ].

At this point, do one of the following:

■Go to Step 3 of the next procedure to program another button for this extension.

■Press [ Central Tel Program ] and go to Step 2 of any button programming procedure in this section to program a button for a different extension.

■Press [ Feature ] [ 0 ] [ 0 ] to exit.

Voice Mail Messages

This intercom Auto Dial button enables the subscriber to access the mail system with the touch of one button.

To program a Voice Mail Messages (VMMsgs) button as specified on communications system Planning Form C:

1 . Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].

2 . Enter the number of the extension to be programmed.

3 . Press a programmable button.

4 . Press left [ Intercom ] [ 7 ] [ 7 ] [ 7 ].

5 . Press [ Feature ] [ 0 ] [ 0 ] to exit.

Communications System Initial Programming 4-11