AT&T 3 manual Outgoing Call Restriction, Line Assignment for Remote Maintenance Device

Before You Begin

6.If additional PARTNER MAIL extensions are specified on Form B1, repeat Steps 4 and 5 for each one.

7.Repeat Steps 4 and 5 for each extension that does not have Voice Mail coverage.

8.Continue with “Outgoing Call Restriction.”

Outgoing Call Restriction

Use this procedure to restrict all extensions associated with the mail system unit and the Remote Maintenance Device from making outside calls.

Security Alert:

This procedure must be followed to limit the possibility of toll fraud abuse.

1.Press [ # ] [ 4 ] [ 0 ] [ 1 ].

2.At the Extension: prompt, enter the extension number where the Remote Maintenance Device (VMS-RMD) is installed as specified on communications system Planning Form B1.

3.Press [ Next Data ] until the display reads 2 Inside Only.

4.Press [ Next Item ] or [ Prev Item ] until the first PARTNER MAIL extension number specified on Form B1 is displayed.

5.Press [ Next Data ] until the appropriate value displays.

6.Repeat Steps 4 and 5 for each PARTNER MAIL extension.

7.Continue with “Line Assignment.”

NOTE:

If Outcalling is permitted, be sure to create Allowed and Disallowed Phone Lists as needed for Outcalling numbers. Instructions are provided in Chapter 4.

Line Assignment for the

Remote Maintenance Device

Use this procedure to remove all lines from the extension to which the Remote Maintenance Device is connected.

Security Alert:

This procedure must be followed to limit the possibility of toll fraud abuse.

1. Press [ # ] [ 3 ] [ 0 ] [ 1 ].

3-4Mail System Initial Programming