AT&T 3 manual Before You Begin, Comlpeting Planning Forms

Mail System Initial	3
Programming

Introduction

This chapter provides programming procedures for the installer of the mail system. These procedures are required for correct operation of the system.

Since certain features (for example, language selection) must be programmed before other features (such as voice mailbox assignments), perform the procedures in the order in which they are presented in this chapter.

Before You Begin

Before you begin to program the mail system, you must have completed planning forms and you must prepare the communications system.

Comlpeting Planning Forms

To perform the procedures in this chapter, you need the following forms:

■Communications System Planning Forms B1 and B2

■Mail System Planning Forms A through N

For information about filling out the planning forms, see Appendix A, “Mail System Planning” and Appendix B, “Communications System Planning.”

Mail System Initial Programming 3-1