AT&T 3 manual Monolingual mode, Bilingual mode, For the secondary language, Menu. Repeat Step

Announcements (Automated Attendant)

	Action	You Hear...
Step 10	Choose an option:	Message Editing Menu.
	Record the Announcement (up to
	2 minutes), then press [ 1 ].
	Press [ # ] to use the current	“The existing Announcement will be
	Announcement. (This option is	used.”
	offered only if the Announcement	(Monolingual mode)
	already exists.)	Announcement Administration Menu.
		(Bilingual mode)
		Prompt to record the Announcement in
		the secondary language. Repeat Step
		10 for the secondary language.
Step 11	Choose an option:
	[ 2 ] [ 3 ] to play back the Announcement.	Announcement, then Message Editing
		Menu. Repeat Step 11.
	[ 2 ] [ 1 ] to re-record the Announcement.	A tone to record the Announcement.
		Return to Step 10.
	[ ★ ] [ D ] ([ ★ ] [ 3 ]) to delete the	If there is no previously recorded
	Announcement and use the one	Announcement:
	previously recorded.	“Deleted. No Announcement created,”
		then the Announcement Administration
		Menu.
		If there is a previously recorded
		Announcement:
		“Deleted. The existing Announcement
		will be used.”
		(Monolingual mode)
		Procedure is complete.
		(Bilingual mode, primary language )
		Prompt to record the Announcement in
		the secondary language. Return to
		Step 10.
		(Bilingual mode, secondary language)
		Procedure is complete.
	[ ★ ] [ # ] to approve the new	“Approved.”
		(Monolingual mode)
	Announcement.
		Announcement Administration Menu.
		Procedure is complete.
		(Bilingual mode, primary language)
		Prompt to record the Announcement in
		the secondary language.
		Return to Step 10.
		(Bilingual mode, secondary language)
		Announcement Administration Menu.
		Procedure is complete.

Announcements (Automated Attendant) 5-7