AT&T 3 manual Programming the Mail System, Accessing the System Administration Menu

Programming the Mail System

Programming the Mail System

All of the procedures in this chapter are shown in short form. For more detailed instructions, see the appropriate section in Chapter 5, “Features.”

Accessing the System Administration Menu

All procedures in this chapter start from the System Administration Menu. This is the menu that you access when you log in to the System Administrator’s Mailbox, as described in the previous section, “Logging In to System Administration” on page 3-5.

If you are already logged in, you can return to the System Administration Menu by doing one of the following:

■Pressing [ ★ ] [ 7 ] to return directly to the System Administration Menu.

■Pressing [ ★ ] [ # ] repeatedly to back up, one level at a time, until you hear the “For System Parameters, press 1[ ]” prompt.

For an overview of the procedural flow described in this chapter, and information about the relationship between the procedures and the mail system planning forms, refer to “Initial Programming Quick Reference,” which follows.

3-8Mail System Initial Programming