AT&T manual Form C Phone, Form C Description, Night Service Button #503 = Not Assigned

Form C: Phone

Form C: Phone

Form C1: PARTNER-34D Phone PAGE

1 of 8

Make as many copies as you need. Use template and/or checklist. For additional instructions, see page 8.

SAMPLE

Template Instructions

● If desired, write in line number, pool access code, dial code feature, or auto dial number.

●If desired, write in Line Ringing (Imm, Del, or No) from Form B2.

●If desired, write in Line Access Restriction or Pool Access Restriction (Out, In, or No) from Form B2.

Ext.

*For PARTNER II systems in Hybrid mode only, if poll 880 is assigned, these two buttons are associated with this pool.

Specify Automatic Line Selection:

Identify extensions programmed as shown:

Check Desired Features

Also write in extension or group number

	Automatic System Answer Button {#111)1			ASA
	Direct Extension Dial Button {#113}1			DXD
	Night Service Button {#503}			NightSvc
	Outgoing Call Restriction Button {#114}2			OCR
	Wake Up Service Button {#115}			Wake
	Caller ID Inspect (F 17)1			ID-Inspect
	Caller ID Name Display (F 16)1			ID-Name
	Do Not Disturb (F 01)			DND
	Privacy (F 07)			Priv
	VMS Cover (F 15)			VMSCover
	Voice Interrupt on Busy Talk-Back (F 18)			VIOB
	Account Code Entry (F 12)3			ACE	1.	PARTNER
	Background Music (F 19)3			Music
						system
	Call Coverage (F 20 XX XX)1,3,5		Cover-XX XX			only.
					2.	Requires
	Call Forwarding/Call Follow-Me (F 11 XX XX)3,5			CF-XX XX
						Auto Dial
	Call Park (I XX)3			Park		button for
	Call Pickup (I 6 XX)			Pickup-XX		each
						extension.
	Conference Drop (F 06)			Drop
					3.	Button with
	Direct Line Pickup-Active Line (I 68)			DLPA		lights is
						recom-
	Direct Line Pickup-Idle Line (I 8)			DLPI		mended, but
	Exclusive Hold (F 02)			ExHold		not required.
	Fax Management (I XX)	3		FAX-XX	4.	Extension
						number can
	Group Calling-Ring/Page (I 7 G or I *7 G)			GCall-g		be pro-
	Group Hunt-Ring/Signal (I 77 G or I *77 G)			Hunt-g		grammed
						as Auto Dial
	Group Pickup (I 66 G)			P/U Grp-g		button.
	Intercom Autodial (I XX or I *XX)3			Ext-XX	5.	You can
						program the
	Last Number Redial (F 05)			LNR		origination
	Loudspeaker Paging (I 70)			Loudspk		extension
						only or both
		3		MS-XX
	Manual Signaling (F 13 XX or F 13 *XX)					the
	Message Light Off (F 10 XX)6			MsgOff-XX		origination
						and
		6		MsgOn-XX
	Message Light On (F 09 XX)					destination
	Recall (F 03)			Recall		extension.
	Save Number Redial (F 04)			SNR	6.	You can
						program the
	Simultaneous Paging (I * 70)			SPage		extension
	Station Lock (F 21)5			Lock		number.
	Touch-Tone Enable (F 08)			TT-EN
	Voice Mail Messages Button (I 777)		VMMsgs-777
	Voice Mailbox Transfer (F 14)			VMBox
F = Feature button G= Group I = Left Intercom button				XX = Extension

Form C: Description

Night Service Button (#503) ( ✔ = Not Assigned)

Night Service must be Assigned to a button with lights at extension 10 if VMS Hunt Schedule (#507) is set to Day Only or Night Only. The VMS Hunt Schedule setting is specified on Form A Page 2.

Do Not Disturb (Feature 0 1)

A Do Not Disturb button lets a system phone user press the button to prevent calls from audibly alerting (lights still flash) at an extension. If the extension has a mailbox, calls are sent to the mailbox when they finish alerting at the extension. A Do Not Disturb button can be Assigned to a button with lights at any extension with a system phone. The button is used to turn the feature on and off. When Do Not Disturb is on, outside callers hear ringing while inside callers hear a busy signal.

B-12Communications System Planning