Form B2 Customized Extension Settings, Form B2 Description

Form B2: Customized Extension Settings

PAGE

1 of 2

Required if you want to change extension settings from defaults for PARTNER II System

and PARTNER Plus System. For additional instructions, see pages 6 and 7.

Identify Extension Settings

Identify Line Ringing {CTP} Option

Identify Restrction

Permissions

Identify

If Different than Default

If Different than Defaults

Group Assignments

Hybrid Mode

Only:

Write line numbers or pool access codes in each

Write line numbers or pool access

codes

column to show desired Line Ringing options

for Line Access Restrictions {#302} or

Pool Access

Restriciton {#315)

No Restriciton ✔

Immediate

Delayed

No Ring

Lines/Pools 3

Outgoing

Incoming

No Access

NR ✔

1 – 4

1 – 6 l 7

NA ✔

E ✔

NA ✔

A ✔

NA ✔

A ✔

NA ✔

P ✔

NA ✔

✔ lines

✔ pools

Not Assigned

only

NA ✔

ALL

1 . Write S for Spanish for F for French.

2 . In Hybrid Mode only, write K for Key extension. Extension 10 always operates as a key extension.

3 . In Key Mode, use Line Assignment {#301} to remove lines from or assign lines to extensions in Hybrid Mode, use Pool Extension Assignment {#314} to remove pools from or assign pools to extensions

4 . Write IN for inside Only or LOC for local Only to indicate restrictions for all outgoing calls on all lines.

5.	Write list number (1–4). Also see Form D, Disallowed Phone Number Lists {#404}.	Assignments
6.	Write list number (1–4). Also see Form D, Allowed Phone number Lists {#407}.	✔	=	Default
7.	Write group number (1–4).	A	=	Assigned or Active
8.	Write group nuimber (1–4). If a lousdpeaker is connected and Simultaneous Paging is desired,	E	=	English
9.	put appropriate extensions in Calling Group 1. Also see Form C, Simultaneous Paging.	NA	= Not Assigned or Not Active
9.	Write group number (1–6).	NR	=	No restriction
10.	Check off tthe same PARTNER MAIL or PARTNER MAIL VS extensions indicated on Form B1.	P	=	Pooled
		{CTP}	=	Centralized Telephone Programming
		{CTP}	=	Centralized Telephone Programming

Form B2: Description

Automatic Extension Privacy (#304) ( ✔ = Not Assigned)

There should be an “A” (Assigned) in this column for the VMS-RMD extension and Fax Machine Extensions (#601) identified on Form B1. This feature prevents users from accidentally interrupting Remote Maintenance Device or fax transmissions.

Also, if VMS Hunt Delay (#506) is set to Immediate (see Form A Page 2), there should be an “A” (Assigned) for the two, four, or six PARTNER MAIL extensions identified on Form B1. This prevents users from accidentally picking up calls sent to Automated Attendant Service.

Communications System Planning B-9

AT&T 3 manual Form B2 Customized Extension Settings, Form B2 Description

Models: 3