Removing the Cover

Removing the Cover

1.Using a Phillips®-head screwdriver, loosen the four cover screws (see Figure 7-3).

Cover Screws

Cover Screws

Figure 7-3. Removing the Cover Screws

2.Slide the cover back slightly to release the slip-clasp that holds the cover to the chassis frame (see Figure 7-4).

Slip-clasp

Figure 7-4. Removing the Cover

3.Carefully lift the cover up, remove it from the chassis, and set it aside.

7-4Upgrading the System

Page 293
Image 293
AT&T 3 manual Removing the Cover Screws