AT&T 3 manual Programming System Parameters, Parameter Factory Setting

Programming the Mail System

Programming System Parameters

Following is a list of the factory settings for the system parameters covered in this section:

Parameter	Factory Setting
System Language	Monolingual, English
Maximum Digit Length	2
Single or Multiple Automated	Single
Attendant

Check mail system Planning Form A to see if you need to change any of these factory settings.

■If you do NOT, skip to “Programming Mailboxes” on page 3-14.

■If you do, continue with the procedures in this section. For these procedures, you select the System Parameters option from the System Administration Menu. The System Parameters Menu plays. Figure 3-2 shows the options available from the System Parameters Menu.

System

Administration

Menu

9

System

Parameters

1

Single or	Fax Extention		Call Answer	General		System	Maximum	System
Multiple		and
			Service	Mailbox		Administrator	Digit
Automated	Fax Message							Language
			Operator	Owner		Mailbox	Length
Attendant		Receiver
					6

Figure 3-2. System Parameters Administration

Mail System Initial Programming 3-11