Hitachi GR2000 Series manual Vrrp Information Error Messages

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

5.13VRRP Information

Table 5-13 VRRP Information Error Messages

Message	Contents
Critical interface with target address not	Critical interface is not set.
specified.	Set critical interface in order to set target address.
Target address not specified.	Target address is not set.
	Set target address.
Failure detection times is greater than check	Failure detection times exceed check trial times.
trial times.	Set a value less than check trial times.
Recovery detection times is greater than	Recovery detection times exceed check trial times.
check trial times.	Set a value less than check trial times.
Check status interval is not in range of 1 to	Check status interval exceeds the prescribed range.
255.	Set the value in the range of 1 - 255.
Check trial times is not in range of 1 to 10.	Check trial times exceeds the prescribed range.
	Set the value in the range of 1 - 10.
Failure detection times is not in range of 1 to	Failure detection times exceeds the prescribed range.
10.	Set the value in the range of 1 - 10.
Failure detection interval is not in range of 1 to	Failure detection interval exceeds the prescribed range.
255.	Set the value in the range of 1 - 255.
Recovery detection times is not in range of 1	Recovery detection times exceeds the prescribed range.
to 10.	Set the value in the range of 1 - 10.
Recovery detection interval is not in range of 1	Recovery detection interval exceeds the prescribed range.
to 255.	Set the value in the range of 1 - 255.

5-92	GR2K-GA-0014
	Ver. 07-02