Hitachi GR2000 Series Filtering/QoS Information Parameters, Interface Names, GR2K-GA-0014 155 Ver

Filtering/QoS Information

Parameters

This{<LineparameterName>specifies<DLCIName>the interface<Timeslotname Name>for theinterface<PeerName>that sets}QoS queue attributes. The following table displays various interface names along with the circuits and protocols that the interfaces supports.

Table 1-76 Interface Names

Interface	Circuits (Protocols)
<Line	OC-3c, OC-12c, OC-48c, serial (PPP), T3, E3, Ethernet, Gigabit Ethernet
<DLCI	(Frame Relay [*1])
<Timeslot	BRI (PPP), PRI (PPP), J2 (PPP), T1 (PPP), E1 (PPP)
<Peer Name>	ISDN
<VLAN	VLAN [ROUTE-OS6B]

*1: Frame Relay circuits can be specified only by <DLCI Name>.

Default:None; only the displayed value is supported.

-Thisqueueparameterlist<Queuespecifies-Listthe-Name>queue list name. (QoS queue attributes must be set before this command invoked.)

Default:None

Range of value: Character strings must begin with an alphabetic character

and contain no more than 14 characters.

-group<NoGroup.numbers>[ROUTE-areOS6B]set.

Default: No default is allowed.

Range of value: The value setting range varies depending on the number of physical lines that set the group band control in the same NIF. Table 1-77 shows the relationship between the physical line that sets the group band control in the same NIF and the group number that can be set.

Table 1-77 Relationship Between the Physical Line That Sets the Group Band Control in the Same NIF and the Group Number That Can Be Set

		Number of Groups
	Physical line that sets the	Physical line that sets the group band control in
	band control.		the same NIF
		One line		All lines
	Line number zero	1 - 16 (*1)		1 - 2
	Line number other than zero	-- (*1)		1 - 2
	*1: If a group number greater than three is set, communication is possible only through line number
	zero.
GR2K-GA-0014			1-155
Ver. 07-02