Hitachi GR2000 Series manual Log Information, Logger-syslog, Network by the following methods

Operation Management Information

4.2Log Information

!	Caution:	Regarding log Information, this object must be used in conjunction with the
		configuration subcommand. LOG information can be sent to other devices on the
		network by the following methods:

1.Sends to the device with syslog function (UNIX workstation, etc.) by using syslog interface. This function enables centralized control of log when controls many devices.

2.Sends by e-mail. This function enables centralized control of log when controls many devices.

4.2.1logger-syslog

Function

Object for creation, deletion, and display of the logger setup, i.e., configuration information necessary for log information output on the syslog interface. Up to 20 of such entries can be registered.

Input format

To create a logger setup entry:

ParameterTosdeleteshow[set]name>loggersyslogsetupsetupentry:<hostentry:name><level><eventlevel>

hoDescription:	Specifies the logout destination host name.
faciDescriptionity>	This parameter specifies the facility of syslog.
	This parameter specifies one of local0, local1, local2, local3,
	local4, local5, local6, and local7. The initial value when this
	parameter is omitted is local0.
Description:	Specifies the logout	on the syslog interface. Only one
leve	among emerg, alert, crit, err, warning, notice, info, and debug
	can be selected.
Description:	Specifies the event level for the logout. Only one among key,
eventlevel>	rsp, rtm, err, evt, mrp, mpl, ip6 and mr6 can be selected.
<

GR2K-GA-0014	4-7
Ver. 07-02