Configuration Error Messages

 

 

Table 5-4 IP Information Error Messages (continued)

 

 

Can not delete policy group configuration with

IP filter list information exists. Delete IP filter list information; delete

filter list configuration.

policy group information.

Can not delete policy list configuration with

Policy group information exists. Delete policy group information first,

policy group configuration.

and delete policy group information.

Can not delete relay group configuration with

Can not delete relay group configuration with relay interface

relay interface configuration.

configuration. Delete the relay interface information first and then

 

delete the relay group information.

Can not delete relay list configuration with

Can not delete relay list configuration with relay group configuration.

relay group configuration.

Delete the group first and then delete the list.

Can not set ARP configuration.

ARP is set in other than Ethernet, ATM, or DLCI. ARP can be set

 

only in Ethernet, ATM, and DLCI. Delete ARP.

Can not set IP address on interface which is

IP address cannot be set on the interface not configured to use IP

not configured to use IP protocol.

protocol. Set IP first.

Can not set IP address on line router which is

IP address cannot be set on the line router not configured to use IP

not configured to use IP protocol.

protocol. Set IP first.

Can not set IP address on non-existing

Specified interface for IP address does not exist. Check the interface.

interface <name>.

<name> configuration information name.

Can not set IP address.

Can not set IP address. The IPv6 address cannot be set, if the

 

interface name type of IP is "group," or if a rmEthernet, AUX, frame

 

relay or DLCI line is used. IPv6 address settings are not permitted for

 

an IP that has a VLAN-defined IPv4 address already set.

Can not set IP configuration on line which is

Attempt made to set IP on the line that is not bound to IP protocol.

not bound to IP protocol.

Set the protocol first.

Can not set IP configuration to <name>.

Attempt made to set IP in grouped interface or interface where IP is

 

defined. Check the specified interface. <name> configuration

 

information name.

Can not set ip null.

Can not set ip null. If 256 interfaces are set for an RP, settings are

 

impossible. Remove the interface for the RP that has 256 interfaces

 

set.

Can not set vlan.

Can not set vlan. VLAN can be set only on an Ethernet or a gigabit

 

Ethernet. If both an IPv4 address and an IPv6 address are set for an

 

IP, VLAN cannot be set for the IPv4 address on the IP.

Can not set vpn.

Can not set vpn. If PPP and the frame relay IP are defined in the

 

same physical port, only one of either PPP or the frame relay IP can

 

be set in VPN settings.

Change is not possible

The configuration definition cannot be changed. Set it after deleting

 

the configuration definition.

Connect type is not point.

IP type is not point. Specify point to the IP type.

Destination ip address not specified.

Although connection type is point-to-point, a destination address has

 

not been specified. Or, the PPP line is set or an IPv6 address other

 

than linklocal is set for TUNNEL. However, settings are not made for

 

the destination address. Specify destination address.

Duplicate destination IP address.

The same destination IP address is set. Make each destination IP

 

address unique.

Duplicate interface name and next hop

The policy list set has the interface name and the next hop address

address.

with the same contents. Make all policy lists unique.

Duplicate IP address.

The same IP address is used. Make each IP address unique.

Duplicate network address.

IP address of the same network address is defined. Specify an IP

 

address so that each network address becomes unique.

Duplicate policy group configuration.

Duplicate policy group configuration. Make settings so that each

 

policy group entry has unique contents.

Duplicate pool ip address.

The same pool IP addresses are set in the same RP. Make settings

 

so that pool addresses in the same RP are unique.

Duplicate prefix.

Duplicate prefix IP address. Set prefix to unique.

 

 

GR2K-GA-0014

5-15

Ver. 07-02

 

Page 405
Image 405
Hitachi GR2000 Series manual An IP that has a VLAN-defined IPv4 address already set