Hitachi GR2000 Series Flow qos QoS Flow Information, Filtering/QoS Information Related Commands

Filtering/QoS Information

Related Commands

flow, flow qos, filter, filter-list, qos, qos-ip-list, qos-tos-map, nat, nat inside interface, nat outside interface

Related Information

None

Precautions

1.The filter flow is determined in the order of the list number designated in the input/output interface of the filter IP flow information (the indication order when show flow filter is executed).

2.This command cannot be set when setting the filter-list(filter list information) or qos-ip-list(QoS IP frame condition information). Delete all of filter-listand qos-ip-listbefore setting this command.

3.Flow information consumes 101 entries in each RP when address conversion (nat) is set. Therefore, when address conversion (nat) is set, the maximum entry count is decreased by 101 per RP capable of flow information definition.

1.1.7flow qos (QoS Flow Information)

The QoS flow information is set. Items set by using this command include: the flow detecting condition parameters to detect input IP frames for which flow control is desired, priority decision on the detected flows, TOS rewriting, and flow control parameters to instruct the contract band surveillance. The maximum number of entries in the QoS list that can be prepared is 10,000 entries per device, a maximum of 2,000 entries for the filter list, and a maximum of 2,000 entries per P.R. However, the maximum number of entries that can be defined varies depending on the RM mounted memory size. Please refer to Table 1-35. Determination on the flow control is performed in the order of the list number specified in the input/output interface of the QoS flow information (the order of indication when the show flow qos is executed). Setting is not possible on the configuration definition qos-ip-list and the configuration definition filter-list.

GR2K-GA-0014	1-57
Ver. 07-02