Hitachi GR2000 Series manual Filter Information, Values During Initial Installation

Operation Management Information

4.7.19Filter Information

Input Format

[set]Parameters[{defau-filter_fwrdacksynipairortpcheckasynchronizpair-filter-filterfilter-doffdroppoair}acksyn-]offfilteringpaircheck}offpair]}]synchronized}]

The initial value items that can be set using filter Information and the initial values during initial installation are shown in Table 4-19. For details of each parameter,

refer to 1.1.10 to 1.1.13 in this guide for			information.
Table 4-19	List of Initial Values That Can Be Set Using Filter Information and Initial
	Values During Initial Installation
Information		Information Name	Initial Value
Group Name
Filter		Operation when filter information	Not relayed.
information		coincides with filter conditions
		Designation of TCP one-way	The packet whose ACK flag is 1 is not treated
		communication permission (ACK	for	.
		flag)
		Designation of virtual circuit	The packet whose SYN flag is 1 is not treated
		establishment permission (SYN flag)	for filtering.
		Sequential check of IP address and	The source and destination IP addresses, and
		upper protocol port number	source and destination upper protocol port
			numbers are checked without replacement.
		Check of source and destination IP	The source and destination IP addresses are
		addresses	checked for replacement without replacement.
		Check of source and destination	The source and destination upper protocol port
		upper protocol port numbers	numbers are checked for replacement without
			replacement.

GR2K-GA-0014	4-59
Ver. 07-02