Hitachi GR2000 Series manual To create the filter interface information Filterinterface

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

8.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

1.1.13filter-interface(Information on Filter Interface of Old BSD UNIX-Based Command System)

Function

Object for creation, modification, deletion, and display of the filter interface information. The filter group is allocated to the interface defined by the IP or IP-address information. When the filter interface is set, the filter for the receive packet or the transmit packet in the relevant interface is judged. A maximum of 512 filter interfaces per RP can be created.

Input Format

To create the filter interface information:

filterinterface
To modify<FilGroupNam>[set]the -				information:{<LinName><DLCIName><VC-filtrName><Groupgroup
To deletetethe				information:	{-in-out}
To showName><Timeslotdelthe -			Name>information:{<PeerLineName><DLCIName>}			<VC	<Group
Parametershow	-			[{<Lin	<DLCI]	<VC
		Specifies the target interface name predefined by the ip or
<Peer{<LineDescription:Name>Name>}<DLCIip-address<VCobject.					<Group	<TimeslotName>
Default:		Undefined. Mandatory input other than for display. When
		omitted, all filter interface information is displayed.
Description:		Specifies inbound or outbound. Either one or both of inbound/
--out}		outbound can be set at the same time.					V r. 07-02
		- : Inbound (specify when filtering on receive side of frame)
1-128							GR2K-GA-0014