Hitachi GR2000 Series manual GR2K-GA-0014 105 Ver

	Configuration Error Messages
Table 5-25 Other Error Messages (continued)
Current configuration file was successfully	Current configuration information file was copied, but because
changed. Configuration file do not modified to	standby configuration file is opened, standby configuration
standby RM because configuration file is	information is not reflected. When updating standby configuration
opened in standby RM.	information, close standby configuration, and then use config copy
	command.
Current configuration file was successfully	Current configuration information file was copied, but because
changed. Configuration file do not modified to	standby configuration file cannot be modified, standby configuration
standby RM because standby RM is not	information is not reflected. When updating standby configuration
ready.	information, confirm standby status and operation, and then reflect
	standby configuration information by using config command.
Current configuration file was successfully	Current configuration information file was saved, but because
saved. Update configuration file do not copy	standby RM is not setup, standby configuration information is not
to standby RM because standby RM is not	reflected. When updating standby configuration information, use
ready.	copy command after setup the standby.
Current configuration file was successfully	Current configuration information file was saved, but because
saved. Update configuration file do not	standby configuration information cannot be copied to cached
modified to standby RM because cached	configuration file, standby configuration information is not reflected.
configuration file create failed.	When updating standby configuration information, confirm the rest
	memory size of standby MC card by using show mc command, and
	reflect standby configuration information by using copy command
	after eliminating causes of error.
Current configuration file was successfully	Current configuration information file was saved, but because this
saved. Update configuration file do not	current configuration file cannot be copied to standby configuration
modified to standby RM because	information file, standby configuration information is not reflected.
configuration file copy failed.	When updating standby configuration information, confirm setting
	status and the rest memory size of standby MC card by using show
	mc command, and reflect standby configuration information by using
	copy command after eliminating causes of error.
Current configuration file was successfully	Current configuration information file was saved, but because
saved. Update configuration file do not	standby configuration file is opened, standby configuration
modified to standby RM because	information is not reflected. When updating standby configuration
configuration file is opened in standby RM.	information, close standby configuration, and then use config copy
	command.
Current configuration file was successfully	Current configuration information file was saved, but because
saved. Update Configuration file do not	standby configuration file cannot be modified, standby configuration
modified to standby RM because standby RM	information is not reflected. When updating standby configuration
is not ready.	information, confirm standby status and operation, and then reflect
	standby configuration information by using config command.
Device out of space.	Because the memory of MC card running short, data can not be
	saved to specified file. Delete unnecessary file of MC card.
File exists.	Specified file name can not be used. Specify another file name.
Filename or directory path is too long.	The spare configuration filename or directory path exceeds 256
	characters. Shorten the spare configuration filename or directory
	path.
Input/output error.	Access to MC card failed. Confirm setting status of MC card by using
	show mc command. When MC card is set correctly, wait for access,
	then execute again.
Is a directory.	Because specified file name is directory, it can not be used. Enter a
	correct file name.
Not enough memory, configuration file is too	Because current or spare configuration file is too big, memory size is
big.	insufficient. Using the editor, delete unnecessary definitions in the
	configuration definition information file.
	Confirm RM memory using the "show router" command (*3) and, if
	RM memory is less than 256Mb, increase it to 256Mb or more and
	then edit the configuration information again.
No such file or directory.	Specified file or directory not exist. Enter correct file name or
	directory.
GR2K-GA-0014	5-105
Ver. 07-02