Hitachi GR2000 Series Show the registration status of Rmon event-group entry, Event-group entries

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Show the registration status of RMON event-group entry:

even		5{		monit	";
				trap;		-mgr";
	typ			log;
				y	"if
};	communidesipio					inInError>200thentrap";
	owner "net"rmon-mgichiro07/25";
Delete re is			d RMON Ethernet event-group entry with the event-group index
number(config)#3, and3howsh evew he esult							event-group entries:
	owner			"net-mgrichiro07/25";
(config)#		5{
Related Configu a ion Objects
RelatedalarmsnmpInformation

The MIB value of an RMON Et e net history group can be referenced using an SNMP manag or this r ut r’s snmp command. For the snmp command, refer to GR2000 Operations Comma ds, Vol. 1.

Pre autions
1.	In order todaccess the Ethernet3		event-group information from an SNMP Manager
	or issue ashowvtrapleteventto an SNMP Manager, you must register the SNMP Manager. For
	the latter	urpose, specify -trapor -ex trap option in the registration action.
2.	Makeeventsureyplog;that the rising event		index and falling_event_index settings are equal to
	those defined by the alarm object. If any discrepancy exists, the event is not
	executed};	in response to an alarm.

3.Make sure that the community setting is equal to the one defined by the snmp object. If any discrepancy exists, no trap is transmitted in the specified event.

4.When RMON eventTable is sent from an SNMP Manager, the change is not reflected in the router’s configuration.

5.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

3-22	GR2K-GA-0014
	Ver. 07-02