Hitachi GR2000 Series manual IPv6 Multicast Routing Protocol

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

5.7IPv6 Multicast Routing Protocol

Table 5-7 IPv6 Multicast Router Control Information Error Messages

Message	Contents
configuration check error	Configuration definition check has failed.
mld:address of group definition is not	No group address is specified on the "smm-join" command definition.
omissible
mld:address of source definition is not	No local address is specified in the "ssm-join" command.
omissible
mld:<address> is not in agreement with the	The range of the group address set by the "ssm-join" command does
group address set up by ssm	not coincide with the range of the group address set by the "ssm "
	command.
	<address>: local address set by the "ssm-join" command
mld:duplicate group <address> clause	Duplicate group addresses are specified by the "ssm-join" command.
	<address>: local address set by the "ssm-join" command
mld:duplicate source <address> clause	Duplicate local addresses are specified within the same "ssm-join"
	command
	<address>: local address set by the "ssm-join" command
mld:duplicate ssm-join clause	Multiple "ssm-join" commands have been set. The maximum
	number is 1.
mld:Source prefix(<IPv6 Source address>)	The range for specifying local addresses specified by the "ssm-join"
has a narrow scope	command is invalid. Specify IPv6 addresses other than local
	addresses.
	<IPv6 source address>: local address specified by the "ssm-join"
	command
mld:The combination total of GROUP and	The sum total of groups and sources defined by "ssm-join" exceeds
SOURCE exceeded the maximum permitted.	the allowable limit. Set the sum total of groups and sources to a
	maximum of 256.
pim:<IPv6 Group Prefix> is not an IPv6	Group addresses specified by IPv6 PIM-SM rendezvous point
multicast address	candidates must be multicast addresses.
	Or the group address specified by the "ssm-join" command of
	PIM-SSM is not an IPv6 multicast address.
	<IPv6 group prefix>: Specified IPv6 multicast group address
pim:prefix length <Prefixlen> should be	The range for specifying prefix length specified by IPv6 PIM-SM
ranged between 8 and 128	rendezvous point candidates is invalid.
	Or the range for specifying prefix length specified by PIM-SMM group
	address is invalid.
	Set within the range of 8 - 128.
	<Prefixlen>: Specified prefix length
pim6: already defined enable or disable for	In pim6 definition, enable or disable is specified for the same
<Interface Name>	interface two times or more. Specify enable or disable only once.
pim6: candidate-bsr is already defined	candidate-bsr of pim6 is duplicate-defined. Delete one of the
	definitions.
pim6: candidate-bsr priority is already defined	candidate-bsr priority of pim6 is duplicate-defined. Delete one of the
	definitions.
pim6: candidate-bsr priority value '<Num>'	The priority level of a BSR candidate is out of the range. Set a value
should be ranged between 0 and 255	of 0 to 255.
	<Num>: Set priority level
pim6: candidate-rp is already defined	candidate-rp of pim6 is duplicate-defined. Delete one of the
	definitions.
pim6: candidate-rp priority is already defined	candidate-rp priority of pim6 is duplicate-defined. Delete one of the
	definitions.
pim6: candidate-rp priority value '<Num>'	The priority of rendezvous point candidates exceeds the permissible
should be ranged between 0 and 255	range. Specify a value from 0 through 255.

5-62	GR2K-GA-0014
	Ver. 07-02